I want to buy a new car, but it needs to be privacy friendly. Sadly you cannot really buy any new Car that is.

Has anybody any experience on making your modern car not phone home to its company, by removing the hardware it uses to do?

  • Scott@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    21
    ·
    6 months ago

    Speaking as someone who worked for a corporate auto maker, it won’t be an easy task since they try to make it as difficult as possible to disable online activation if even providing the ability at all.

    The only real solution is pulling the head unit and trying to find any modem and desolder it, which who knows if it would function as it had before hand since everything is integrated.

    It will also hurt resale value.

    • ara@lemmy.ml
      link
      fedilink
      arrow-up
      15
      ·
      6 months ago

      When I worked on auto-maker on the head units, they were integrated on the chip, the ones that had a sim slot where you can insert and extract it were the ones for development. Recent cars, their GPS and screen media menus uses the Linux inside the modem chip.

        • TurdMongler@lemmy.world
          link
          fedilink
          arrow-up
          13
          ·
          6 months ago

          Black box tracking device. Just like Intel Management Engine, AMT and Microsoft Pluton! Proprietary Blobs. You don’t own your device.

        • ara@lemmy.ml
          link
          fedilink
          arrow-up
          7
          ·
          6 months ago

          Unless you get an expensive car, I think they do that to reduce expenses. Expensive cars have dedicated CPU for that, but they still communicate with the head unit for online data.

    • Critical_Insight
      link
      fedilink
      arrow-up
      2
      ·
      6 months ago

      Maybe you could build a faraday cage around it or something. Wrap it in foil.

    • BearOfaTime@lemm.ee
      link
      fedilink
      arrow-up
      1
      arrow-down
      1
      ·
      5 months ago

      Or just put a power test attentuator on the antenna output.

      It essentially absorbs the RF from the antenna and radiates it as heat. Since cell is pretty low power (1/2 watt max, IIRC), and a cell radio will stop trying to transmit after a while (though it will try again), I don’t think it would cause any problems.

      But I’m not an RF engineer.

      • Scott@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        1
        ·
        5 months ago

        The newer cars from the company I worked for were always trying to phone home, not sure about other companies but this one was trying to lock you into the online ecosystem.