MX Linux, Xfce 4.18

Closing the laptop lid suspends the system, opening it resumes it, but the screen is black. I’m guessing it’s related to powerup because suspending through the logout menu and systemctl suspend both work as expected. When it’s black, switching to a different tty works, as well as C-M-Backspace to logout.

Same results with both lightdm and sddm, when replacing suspend with hibernate, and I’ve tried a few solutions like disabling lock on sleep.

Seems like this issue has been around for years, but had a whole bunch of different causes since every other thread has a different solution.

XFSETTINGSD_DEBUG=1 xfsettingsd --replace --no-daemon > /tmp/xf.log 2>&1

ps -ef | grep -E ‘screen|lock’

xfconf-query -c xfce4-power-manager -lv

dmesg, cleared it before trying to suspend

updates:

I’m not seeing a black screen, instead it turns on the display and then turns it off.

Additionally, I tried closing and opening the lid a few times, and it woke up correctly.

I tried it in i3wm with the xfce power manager to suspend after closing the lid. It woke up correctly 10 times in a row.

Solution: start an xrandr config and the monitor turns back on.

  • just_another_person@lemmy.world
    21·
    8 months ago

    I’ve tried resuming 50+ times while troubleshooting, and it only once did it correctly. Now I try to replicate the bug and it worked correctly 2/3 times

    That’s just the computers fucking with you. It’s how it always happens 😉

    Regarding the sleep modes, I was referring to the S* states. Run this:

    dmesg | grep 'S3\|suspend'

    • Shareni@programming.devOP
      1·
      8 months ago

      Tried systemctl suspend and then resume:

      dmesg after a successful resume

      sudo dmesg | grep -E "S3|suspend"

      [ 9760.639020] PM: suspend entry (deep)
[ 9761.235526] printk: Suspending console(s) (use no_console_suspend to debug)
[ 9764.716421] ACPI: PM: Preparing to enter system sleep state S3
[ 9764.764150] ACPI: PM: Waking up from system sleep state S3
[ 9767.889922] PM: suspend exit
      • just_another_person@lemmy.world
        1·
        8 months ago

        The only thing that looks odd in there is the default in libgl, but otherwise looks okay. So it’s probably not a compatibility problem.

        How is your swap sized compared to your system memory?

        • Shareni@programming.devOP
          1·
          8 months ago

          I just tried starting the xfce power manager in i3 and using it to go to standby when i close the lid. It woke up 10 times in a row without an issue. It looks like it’s a purely xfce issue.

          Also, when it wakes up it turns on the display, but then it doesn’t go black but instead turns it off. I was still able to reboot while it was off.

          $ swapon -s
Filename				Type		Size		Used		Priority
/swap/swap                              file		38915068	0		-2

          Memory: 2926MiB / 31859MiB
    • Shareni@programming.devOP
      1·
      8 months ago

      That’s just the computers fucking with you. It’s how it always happens 😉

      Oh I know, just complaining

      sudo dmesg | grep -E "S3|suspend"

      [ 7225.917778] PM: suspend entry (deep)
[ 7226.596293] printk: Suspending console(s) (use no_console_suspend to debug)
[ 7230.132960] ACPI: PM: Preparing to enter system sleep state S3
[ 7230.178542] ACPI: PM: Waking up from system sleep state S3
[ 7233.500089] PM: suspend exit

      cat /sys/power/mem_sleep gives me: s2idle [deep]