It was nice knowing Raspberry Pi while they lasted. Going to suck losing something that has changed the homegrown embedded system hobby forever.

    • empireOfLove2@lemmy.dbzer0.comOP
      link
      fedilink
      English
      arrow-up
      28
      ·
      edit-2
      17 days ago

      There’s tons of similar SBC’s out there from Chinese manufacturers, like Orange Pi, Banana Pi, etc; usually using mediatek RISC-V or rockchip ARM processors. They’re all poorly supported on the software and documentation side though and take more work to get going, which has always been where Raspberry shined- nobody else has made embedded computing so easily accessible with click and go OS options and continuous kernel maintenance.
      Probably the only board closest to software parity is the pine64 boards… but it’s still not quite as good.

      • YurkshireLad@lemmy.ca
        link
        fedilink
        English
        arrow-up
        27
        ·
        17 days ago

        This is the key point for alternatives. None seem to have the community and support (docs, s/w quality etc) that is remotely close to that of the Raspberry Pi.

        • BrianTheeBiscuiteer@lemmy.world
          link
          fedilink
          English
          arrow-up
          5
          ·
          17 days ago

          Guess the community for some of these is about to get much bigger. I’m not in the market for an SBC but this is a big negative against the Pi.

            • Richard@lemmy.world
              link
              fedilink
              English
              arrow-up
              4
              ·
              17 days ago

              Why could you not run a modern OS after a couple of years? Those SBC manufacturers did not invent an entirely new processor architecture for their computers, you can just generically compile the kernel (plus maybe some slight device tree work).

      • helenslunch@feddit.nl
        link
        fedilink
        English
        arrow-up
        2
        ·
        17 days ago

        I don’t really recommend any of them anymore, given how much more powerful and versatile x86 processors are and how much their prices have come down very close to SBC levels…

    • Dasnap@lemmy.world
      link
      fedilink
      English
      arrow-up
      13
      ·
      17 days ago

      I got a ‘LePotato’ a few years back when Pi had stock issues, and it worked quite well as a Pi 4 clone.

      • pezmaker@programming.dev
        link
        fedilink
        English
        arrow-up
        10
        ·
        edit-2
        17 days ago

        Yep, using one to run clipper for my 3d printer with armbian as the OS. It’s been rock solid for me. There obviously some adaptation and discovery when trying to use the io as it’s similar-but-not the same as the raspberry pi io and manipulating it is not the same. But it works, it was available, it was competitively cheap, and it’s been stable

        Plus I get to say I’m running my 3d printer on a potato