jtablerd@lemmy.world to 3DPrinting@lemmy.worldEnglish · 1 year agoSwitched to 0.8 nozzle on my ender not looking backlemmy.worldimagemessage-square21fedilinkarrow-up131arrow-down10
arrow-up131arrow-down1imageSwitched to 0.8 nozzle on my ender not looking backlemmy.worldjtablerd@lemmy.world to 3DPrinting@lemmy.worldEnglish · 1 year agomessage-square21fedilink
minus-squareSawblade@lemmy.worldlinkfedilinkEnglisharrow-up1·1 year agoDang, I have .8s for all my hotends but haven’t got around to trying them. Some day though. Thanks for the motivation.
minus-squarejtablerd@lemmy.worldOPlinkfedilinkEnglisharrow-up2·1 year agoWhen you have big shit to print try it, I’ve cut 20h parts down to 9h
minus-squareSawblade@lemmy.worldlinkfedilinkEnglisharrow-up1·1 year agoYeah totally get it, going to .6 already forced me to switch to 5kg spools on my commonly used filament. Any troubles keeping up with extruding through a .8? Having a reason to spend money on a higher performance hot end was my main worry from using it.
Dang, I have .8s for all my hotends but haven’t got around to trying them. Some day though.
Thanks for the motivation.
When you have big shit to print try it, I’ve cut 20h parts down to 9h
Yeah totally get it, going to .6 already forced me to switch to 5kg spools on my commonly used filament.
Any troubles keeping up with extruding through a .8? Having a reason to spend money on a higher performance hot end was my main worry from using it.