I bought an Optiplex 5040, with an i5-6500TE, and 8 GB DDR3L RAM.

When I bought it, I installed Fedora Server on it. It got stuck every few days but I could never see the error. The services just stopped working, I couldn’t ssh into it, and connecting it to a monitor showed a black screen.

So, I thought let’s install Ubuntu Server, maybe Fedora isn’t compatible with all of its hardware. The same thing is happening, now, but I can see this error. Even when there’s nothing installed on it, no containers, nothing other than base packages, this happens.

I have updated the bios. I have tried setting nouveau.modeset=0 in the grub config file. I have tried disabling and enabling c-states. No luck till now.

Would really appreciate if anyone helps me with this.

UPDATE:

  • I cleaned everything and reapplied the thermal paste. I did not see any change in the thermals. It never goes over 55°C even under full load.
  • I reset the motherboard by removing that jumper thing.
  • I ran memtest86, which took over 2½ hours. It did not show any errors.
  • I ran a CPU stress test for over 15 hours, and nothing crashed.
  • I also ran the Dell’s diagnostic tool, available in the boot menu of the motherboard. The whole test took over 2 hours but did not show any errors. It tested the memory, CPU, fans, storage drives, etc.
  • tenchiken@lemmy.dbzer0.comEnglish
    15·
    3 months ago

    That server sounds a bit older in the teeth… Has new thermal paste been applied to the cpu? Even if the reported temps are under 90c, you might be getting hot spots causing glitches inside the package.

    Worth trying a couple of different generations of kernel as well, both newer and older. You might be hitting a regression somewhere.

    • nutbutter@discuss.tchncs.deOPEnglish
      2·
      3 months ago

      I cleaned everything and reapplied the thermal paste. That did not solve the problem. Also, the CPU is only of 35 watts and never goes over 55°C.