Yesterday this usb port works as usual, but today I turned on the notebook and just nothing. I tried to connect usb stick, phone, but nothing. lsusb can’s see it. What can I do, what can I check?

  • Stiltonfondu@sopuli.xyz
    3·
    7 days ago

    You could try the little reset hole on the bottom of the laptop.

    I had some weird issues with my z16 none of the usb c ports were working and neither was the usb c dock.

    I think there must have been some static buildup or something that triggered a surge protection or something but for me using the reset pin hole did the trick

    Just have a read up on doing that for your model

    It’s doesn’t wipe the laptop. Just resets the power circuit or something

  • mark3748@sh.itjust.works
    2·
    7 days ago

    You can try to see if lspci sees the USB controller. Next I would try running diagnostics from UEFI, see if you get any errors. Try a bootable USB to verify if it’s a hardware or software issue.

    Any hardware diagnostic failure or failure to boot from it will tell you you need a new system board.