Aside from the film grain, I’m pretty impressed that the camera seemed to survive that and that the footage from it could be extracted like nothing of this nature had ever happened to the device.
because only product being irradiated goes there. no human should be in that area. plus with the lights off you see the ionized air. that would probably be washed out with another light source.
the lighting should be consistent throughout the experiment so that the effect of the radiation cannot be confused with change in light levels. goodness, why would someone need that explained to them? you must not be the inquisitive type.
Bonus: the photo was taken with a film camera and the graininess is from all the radiation.
Digital camera also get funky with radiation: GoPro Ride Through an Electron Beam Irradiator at Full Beam Power / @andrewseltzman9280/ youtube.com
Does non beta-radiation have the same effect? (Especially gamma rays which don’t even have an electric charge)
I don’t know. If the gamma rays are absorbed and converted to electrons in the photo-sensor, it could also cause noise I suppose ?
It’s kind of crazy how the electron beam looks like a special effect from a 1980’s sci-fi movie.
Very cool. Feels like it should be a level in Half Life.
Awesome
Aside from the film grain, I’m pretty impressed that the camera seemed to survive that and that the footage from it could be extracted like nothing of this nature had ever happened to the device.
Well, it WAS impressively shielded as well.
Super cool. Working on some ebeam sterilization stuff through contractors. Cool to see the nuts and bolts.
why the dogfuck did they not illuminate the hallway the camera goes through
because only product being irradiated goes there. no human should be in that area. plus with the lights off you see the ionized air. that would probably be washed out with another light source.
Why would they? Humans aren’t supposed to be there
for the same reason they sent a camera into it… to assist with visualization 🤨
But you can see the radiation beam perfectly easily without illumination so what’s the actual problem
the lighting should be consistent throughout the experiment so that the effect of the radiation cannot be confused with change in light levels. goodness, why would someone need that explained to them? you must not be the inquisitive type.
Noise: digital
Grain: film