Hi everyone! Any exciting plans this week? Any new cubes or comps planned?
You must log in or register to comment.
I’m annoyed that I’ve only just found this community. I’m not using Reddit anymore, but I have gone back to the Cubers subreddit a few times. I quit Reddit and started Cubing together at the start of summer, Cubing was my Reddit replacement.
So I just found this community today and see it’s a graveyard with zero discussion. Which sucks! I want to talk about cubing with people.
IRL the addition of a cube to my biker/metal head look has left a lot of people confused lol. I have a friend that used to cube but he never replies, and there’s a guy at my kids school that has solved in front of an Assembly but I’ve yet to meet him.
Anyway, ramble ramble, Hi there anyone alive?
Hi there, and welcome.
There is a few cubers here but yeah, it’s pretty quiet…
Anyway, what method do you use? do you compete? are you a speedsolver, a collectionner, both?
I’m a CFOP man but Roux interests me, I just can’t seem to wrap my head around the last algs yet.
I guess I’m a speed solver, just a slow one. I’m nearly 40 and just wanted something to occupy my mind rather than Reddit (social media in general) and it’s certainly done that. Currently I’m working through learning OLL, then it’s PLL which is apparently easier.
I like being able to stand at a bar 6 beers in and solve a cube in a minute or two with one eye shut, and I like that I had no clue how to do this 3 months ago and now I’m faster than the majority of people at it
Huh, I’ve always seen people recommend learning PLL before OLL. Hope that’s going well for you, anyway. I’d recommend you learn algs that work well for you rather than whatever your source suggests (check some algs out over on algdb.net).
Also, you may want to check out the Speedsolving Forums. I’ve used them and here to supplement my lack of visiting the cubing subreddit.
Thanks for the algdb.net link, looks like a good site. I’m using https://www.speedcubedb.com/a/3x3/OLL atm because I like that it tells you how to set the alg up too, but I’ve bookmarked your link.
Which is a great little resource, just a pity it’s on Reddit.
OLL seemed to make more sense to me because I already know some of them, and the rest seem to be variations of them, so I just need to remember that THIS case does this, but if it looks like THAT then I vary it like THIS.
PLL just makes my brain hurt, hopefully OLL will help with that.
Seems like that link has been saved in wayback machine: https://web.archive.org/web/20220407160539/https://www.reddit.com/r/Cubers/comments/tygask/learn_oll_the_easy_way/
just for backup or if we don’t want to go back to reddit
Hey thanks that’s great, I’ve just gone and saved that to my home screen on my phone.
Also it may not be as active in here but my original intention was to stir up some activity and it seems to have worked. I’ve talked more about Cubing this week than ever before and that is good enough for me.
I’m using https://www.speedcubedb.com/a/3x3/OLL atm
I didn’t know about this site and, just from skimming it a bit, I’m impressed. I’ve just come back to cubing after a 3-year long pause and didn’t catch up with the times, so thanks for the link, I’ve bookmarked it also.
Which is a great little resource, just a pity it’s on Reddit.
Yeah, sucks to be a cuber and wanting to be away from Reddit, because the r/cubers sub was actually one of my favorites.
PLL just makes my brain hurt, hopefully OLL will help with that.
It definitely will. Some PLLs are just combinations of shorter OLLs (take the T perm, which is a sequence of a T OLL and a fish-shape OLL), so it’ll definitely help you out. Also, the fact that there’re way fewer algs in the PLL set will make it a breeze (hopefully) after you grind through OLL, so maybe that’ll help out your motivation. Still, I think it’s a bit odd to learn OLL first, but it seems fine and even good now that I think about it.
Yeah the speedcube db is great because it’s all in sections so you can pick say Fish Shapes and just concentrate on them.
As for PLL or OLL first debate, I’m already doing 2 look so the idea is to get down slowly to 1 look. I keep going back to Guitar analogies and it doesn’t really matter the order on Guitar that you learn once you have a solid foundation. I really am treating Cubing the same way.
When I get bored of OLL I’ll go to PLL and switch back again. It’s a way of staving off the boredom while teaching my muscle memory.
I’m already at a point where I’m getting a little frustrated at forgetting some OLLs so it won’t be long. Thanks to you I’m learning T perm first
I guess I’m a speed solver, just a slow one. I’m nearly 40 and just wanted something to occupy my mind rather than Reddit (social media in general) and it’s certainly done that. Currently I’m working through learning OLL, then it’s PLL which is apparently easier.
In my opinion, if you time yourself, you’re a speedsolver. I’m older than you (43), but I know that I won’t reach sub-15 since I can train “properly”. I’ll be happy to be sub-20 !
Learning 78 algs (even though I knew more than half of the PLL) was definitively a deal-breaker for me. Even with CMLL I struggle to reco the pattern and then reco the alg associated… I know that I lack practice, but I’m glad other methods exist ! (I looked at Petrus and Heise before Roux).
I’m a CFOP man but Roux interests me, I just can’t seem to wrap my head around the last algs yet.
The LSE stage? At first, you can go without algs. Here how I process it:
After CMLL, the last step is divided into 3 parts:
- 4a: edge orientation (EO)
- 4b: finish L and R sides (if done with EO: EOLR, but don’t learn that yet. I still don’t know it :þ)
- 4c: permut M edges
4a: If you take the time to analyse EO, you’ll see it’s really simple. Let’s say that top/bottom is yellow and white:
- The goal is to have only yellow/white on top and yellow/white on bottom.
- in order to achieve that, you “reduce” all your cases to the “arrow case”.
If you don’t know yet, arrow case is 3 non-white/yellow on top, and 1 non-white/yellow on bottom. Once you have an arrow, you do M’U*M*, with *=’ or *=nothing (or MU*M* depending on the arrow facing you or not)
Except for the 6 flipped-edges, there are 3 cases that are not solved/arrow cases:
- 2 adjacent flipped on top, 2 on bottom : M2 and you have the arrow example
- 4 flipped with 0 adjacent (4 on top, or 2 on top opposite, and 2 on bottom) : the goal is to swap UF and DF (or UB and DB): M’ U2 M can achieve that (in fact, I think that M* U2 M* are ok) example (4 on top), ex2(2 on top, 2 on bottom)
- only 2 flipped : M* U* M* will do the trick (they can’t be on the same face). I put the one on the M slice on D with M or M’, then I put the one on r/L on top of the other one with u/U’ and I bring the first one on top again with M/M’ :
ex1 both on top
ex2, symmetrical to ex1
ex3 both on top again
ex4 1top, 1 bottom
ex5 1 top, 1 bottom, diag case
ex6 1 top, 1 bottom, same face
ex7 1 top, 1 bottom, same face2
ex8 2 bottom
You can see that in a lot of cases, the last M can be M’. But I like to keep it simple ;)
For the 6 flipped edges, either you learn an alg, or you M*U*M* to reduce to only 2 flipped: example
See also the flow chart in https://rouxl.es/lse.html
4b: in this step, your U and D faces should have yellow/white stickers only.
The goal is to finish the left and right sides (that is, put UL and UR). In order to do that, the easiest way, is to put UL/UL both in D, adjust the U face, do M2, and put U correctly.
- if they already are on the D face, AUF, M2 AUF
- if they are on U, opposite, AUF to put them on the M slice, M2 to put them on D (so we are back to first case), AUF,M2,AUF
In all other case, we first bring them diagonally of each other on the M slice.
- if one on U, one on D, AUF
- if they are on U, but adjacent, M2 to bring one on U, one on D. Then, AUF.
And then M* U2 M* to bring them both on D:
And then you finish with AUF,M2,AUF
Sometimes, you can merge the two steps:
That can happen when one of UL/UR are between L/R corners. I’ll let you experiment with it.
4c: L and R are solved now. You just have to permut M edges now.
There is really only 3 cases: bars, dots, and cycles.
- for bars, it’s just U2 M2 U2 (with M* setup)
- for dots, E2 M E2 M’, or (U2 M’ U2 M2 )2, or (U2 M2 U2 M’)2, or any other alg
- for 3 cycles, on the M slice, you will have 4 “blocks”: 1x2, 1x2, 2x2 and 1x1:
ex 2x2 is yellow-blue, 1x2 are green-white, and yellow-green, and then 1x1 is white-blue.
You’ll have to do U2 with the 1x1 without breaking the 2x2.
In the example, if you do U2, you’ll break the blue line of the 2x2, so you first have to do M
Doing so, you will have a 1x3 line (here white line) and a 2x3 block (here with yellow line).
Then you bring the 1x3 on top, U2 ( and sometimes M*)
Hope it helps
This is the first comment I’ve bookmarked on Lemmy. There’s a lot here, thanks. I’ll defo be coming back to it
Hi! I’m also here from Reddit and created this community because I enjoyed the subreddit back then. It’s nowhere near as active but I hope we can create a good community here too.
Work is a bit busy these days so I’m less active and cube less these days.
This week I’ve upgraded from a magnetic RS3M to a UV Tornado which has no springs!
I love my RS3M but always knew it was gonna be a transitional cube, like when I learned how to play guitar on an old POS I had laying around knowing I would buy a good one if I really stuck with it.
Now I’ve seen people doing reviews and saying “Bare in mind that buying this premium cube won’t magically make your solve times better” but this upgrade really has. I average between a minute and 1:10 usually, but I’m getting much more 40-45 second solves this week.
It’s super fast lubed up, I’ve had to turn everything up in the tensioning to slow it down. Corner magnets on full strength is really nice, you can feel the cube hitting the corner, which allows me to do more algs without looking, a skill I’m working on so I can get Look Ahead working.
For lube I bought some Gravitas and Dignitas and I made my own from a YouTube video, 1 part conditioner and 2 parts Vegetable Glycerin. You can use any oil instead of VG apparently.
I haven’t been “actively” cubing since ~april. Just fidgeting/hand scramble solving since there is always a cube at my desk. About a month ago I tried to time myself, and I have forgotten a lot of algs… FB was still good move count wise, SB was a disaster and LSE was OK.
Fast forward today, I had some not so bad result (with occasional sup-30 because I messed up some of the steps). I even got some sub-20 (19.*), and a 22.07 ao5. But ao25 is 24.5. (For reference, I had a 18.89 ao5, a 21.51 ao25 and 23.08 ao500 mid-february).
Still, it felt pretty good, and I hope I’ll find more time for cubing.
I carry my cube around in my pocket and just play with it when I would be staring at my phone. It’s always there so I have a go every day. Like learning to play guitar I was taught to have the guitar nearby and in sight all the time and I’d play it more.
I bought a RS3M 2020 when it first came out, but never cared for it (too loose). Finally got around to lubing it (cubicle weight 1) and tightening the screws a bit and holy cow, can’t believe this is a budget cube. If I didn’t just get the tornado flagship, I could be content using the RS3M as my main.
Brizzon Side Open V 2023 with unexpected Austin Reed from USA in attendance
