• nakal@kbin.social
    link
    fedilink
    arrow-up
    8
    arrow-down
    2
    ·
    6 months ago

    There is a lot of power to waste for the savings you made, when not buying expensive SSDs (20€ a year is not much). Where we use HDDs, we don’t care about noise. Durability? We use huge RAID systems with lots of redundancy.

    I personally like to swap new drives after 5 years to avoid failures. So when you find a 16 TB SSD for 350€, you send me a message.

    • Tja@programming.dev
      link
      fedilink
      English
      arrow-up
      4
      ·
      6 months ago

      My 4 bay HDD NAS uses around 45W, 50W with some light load, 70W spinning up. That’s about 1kWh per day, or 150 EUR per year.

      I use it in my room, so I very much care about noise.

      More durability = less redundancy (less cost) + less frequent swaps (less cost). My anecdotal evidence is 1 failed SSD in 15 years (160GB Intel, basically first Gen). Every other SSD is still working. I have a drawer full of failed HDDs.

      Plus more performance.

      • m0darn@lemmy.ca
        link
        fedilink
        English
        arrow-up
        2
        ·
        6 months ago

        Geez power is expensive for you folks.

        In Vancouver we pay 0.14 CAD per kWh (.096 EUR) for usage beyond 675kWh in a month. (0.0975CAD, 0.068 EUR, before the threshold)

      • nakal@kbin.social
        link
        fedilink
        arrow-up
        1
        ·
        6 months ago

        My HDDs run 24/7 without spin up btw. I’m just talking about the costs. My drives don’t fail that much as yours. The recent drives that failed were WD Blue that were very old and only used for backups. And yes, all backups were still readable, even the drive was reported as failed. Compare it to SSDs that often fail “spectacularly”.