I usually mount encoders by just gluing them in place. JB weld works great. But I got this low profile one from beekeeb and if you put glue on the bottom it will stop it from rotating. I’m trying to think of other strategies. Right now I’m working on a way to somehow mount it to the bottom half of a choc switch and then glue the switch to the pcb, but still don’t have a good way to do it.

Edit: To be clear, I’m not trying to mount this in a pcb designed for an encoder. I’m putting it in place of a typical switch on a pcb. In the past I’ve just used JB weld on the bottom of an EC11 to hold it in place and it worked great. The issue with this one is that the bottom is open, so if I use any kind of glue to mount it the glue will also prevent the encoder from rotating. You can see what I mean here: https://shop.beekeeb.com/wp-content/uploads/2022/07/IMG_2433-scaled.jpg

  • morsebipbip@lemm.ee
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    i guess you could put it in place, bend the big fixation pins outwards and then glue those directly on the inside of the case.

  • FlatFootFox@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    Are you trying to make a hotswap encoder or something? The two big pins on the sides are mounting pins. Just solder those bad boys down and you should be good to go.

    • jhelvy@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      solder them to what? I don’t see anything that would work on a typical switch mount in a pcb. Not trying to make something hotswap.

      • FlatFootFox@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        Ah, sorry, just saw your post update. I thought you were working with a PCB with an encoder footprint. Unfortunately I don’t have much experience adding an encoder to a non-encoder board.

  • obosobM
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    It looks like it fits the standard EC11 footprint. Surely it’ll just mount to the PCB directly.

      • obosobM
        link
        fedilink
        English
        arrow-up
        1
        ·
        edit-2
        1 year ago

        But why do you need glue? It’s got an EC11 footprint, solder it to that.

        Okay, just saw your edit. What’s stopping you from just modifying the PCB in kicad and swapping a switch footprint, rather than bodging it?

        Anyway, yeah, dremmeling out a choc bottom sounds a reasonable solution. Or just be careful and only glue the perimeter

  • Skree@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Before the whole reddit explosion squished sales I was working on having hotswap EC-11 single key pcbs. I’m basically there. It’s expensive with the method I’ve found that works but an option if you’re interested.

    Honestly, if you don’t want hotswap you could also just solder them to one of the EC-11 single key pcbs I’ve made.

    • jhelvy@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      Good idea on the single key pcbs. Got a link? And man, sorry about the explosion. Totally didn’t think about how it’d affect sales. So far I still don’t think it was a good move. I keep running into more buggy stuff with lemmy, and every time I search for something on google I get a reddit link. No new posts on here are gonna get picked up by Google so that’s the end of searchability.

      • Skree@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        https://github.com/WainingForests/Universal-Toe-Beans Or toss me a email / message me on discord (Alakuu or Skree_LLC) and I’ll see about getting a listing up. My prototypes in black worked perfectly fine. I haven’t ordered for the hotswap just yet but if you’re interested I can finalize the design tonight and order probably tomorrow!