They’re affordable and ubiquitous, but homeowners shouldn’t be able to act as vigilantes.

  • nothacking@discuss.tchncs.de
    link
    fedilink
    arrow-up
    31
    ·
    1 year ago

    I just grabbef a generic IP camera, connected it over ethernet, and firewalled it so it could not make connections out to my home network or the internet. Turns out it just uses an mpeg stream for the video, so recording it is just a matter of running curl on a server. Any network camera that does not depend on a server should work fine for this type of stuff.

    • DeltaTangoLima@reddrefuge.com
      link
      fedilink
      arrow-up
      4
      ·
      1 year ago

      Yeah, this. I do the same with my Reolink cameras - block all external access and I use a Frigate docker container to record footage to my storage. Bonus is I have Frigate using a Coral TPU, so it’s got some really accurate, and fast, inferencing/recognition baked in.

    • Rai@lemmy.dbzer0.com
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      Could I do this with an RPi 4 B 4GB, I wonder? I’m just About to have mine arrive and I would love to have a couple CCTV cameras in my place.

      • 0110010001100010@beehaw.org
        link
        fedilink
        arrow-up
        4
        ·
        1 year ago

        As long as you are just doing capture and aren’t attempting to do anything where a re-encode of the video stream is needed then absolutely. You’ll need something other than a microSD card though to write the video too.

        • Rai@lemmy.dbzer0.com
          link
          fedilink
          arrow-up
          2
          ·
          1 year ago

          Brilliant, yah I’d just want it captured and stored on like a WD NAS HDD attached to a computer in the basement.

          Or if I ever get my ass in gear and set up my GSA…

      • nothacking@discuss.tchncs.de
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        Yes, elit does take some messing around to get working though, so I wouldn’t recommend unless you want to spend a bit messing around with configuring a server. (Make sure to back up the pi’s SD card so if it fails you can easily replace it)

    • Moonrise2473@feddit.it
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      i’m also thinking to just take a cheap reolink and put over the door - but it would be cooler if there was a screen inside that turns on when someone is detected outside (even by an ultra cheap PIR sensor, don’t need sophisticated AI recognition stuff)