Our roof has these wooden support beams which are a pretty rough cut wood, I was wondering which electrical sanding tool would be the best for something like this, an orbital sander, belt sander…? Thanks!

  • Heliumfart@sh.itjust.works
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    I would use a seven inch disc on a large angle grinder. It’s super aggressive, def will be the fastest. A bit hard to control, and easy to have it dig in, so practice where you can’t see it. Your arms will feel the burn after.

    • sinnerdotbin@lemmy.ca
      link
      fedilink
      arrow-up
      4
      ·
      edit-2
      1 year ago

      Unless they are going for a distressed finished look, this is a horrible idea. Even with experience there is no way you’ll get a flat finish; without experience you’ll have deep pockets and very uneven, rounded corners. Maybe slightly faster than a belt sander, but it’d be negligible and definitely not after all the finish sanding that will be required after.

      • Heliumfart@sh.itjust.works
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        I’ve done several timber frames and refinished a dovetail log home with an angle grinder. You can achieve a flat finish with care, and the time difference over a belt sander is far from negligible. But it is perhaps a bit tricky for a beginner.

      • sinnerdotbin@lemmy.ca
        link
        fedilink
        arrow-up
        1
        ·
        edit-2
        1 year ago

        Though not sure what their intentions are. If you are just trying to save getting splinters then use whatever is most aggressive sure. But I got the impression this was going to become an attic room otherwise why even bother?