• 0 Posts
  • 8 Comments
Joined 1 year ago
cake
Cake day: June 13th, 2023

help-circle



  • undefined> y the drill plus support block, but first try rounding them by hand with a rasp, file, or a bench chisel. Using the router like that, especially with suc

    Ooh, if you have a router and round-over bit, you could make a jig making a modified router base-plate out of 1.5" thick stock. The idea would be to create a recess for the round-over bit to set in approximately halfway into the stock. Then have an “1/2” hole offset from the radius of the bit to all you to insert the dowel and rotate. With the jig attached to the router and a hole with a tight enough tolerance you may not get too much chatter when feeding the stock into the jig.




  • I am also new here and I am a long time lurker, 2008, from the place that shall not be named.

    My initial feel is that Lemmy is very much like pre Digg days and a kin to the traditional style forum boards where discussions aren’t old news when the post is only 12 hrs old.

    This is a breath of fresh air even with the growing pains I expect may come with the sudden influx of refugees.