Got a used HP Probook laptop. Just needs a new drive. HP specs say it has an m.2 2280 slot. So that’s what I ordered. Guess I needed to look closer.

edit: Thanks for all the info, guys. Different types of keys are explained here. Gonna have to look for a sketchy no-name brand.

  • Zeoic@lemmy.world
    link
    fedilink
    English
    arrow-up
    167
    ·
    edit-2
    2 months ago

    The port is a B key m.2, while the ssd is an M key m.2

    B keys are used in SATA m.2 ssds, while M keys are pcie nvme m.2 ssds. You bought an nvme m.2 ssd, but needed a sata m.2 ssd.

    (You can tell by how there are 28 pins on that side of the port, and 29 on the ssd. That matches b and m keys, respectively)

    • Snot Flickerman@lemmy.blahaj.zone
      link
      fedilink
      English
      arrow-up
      31
      ·
      edit-2
      2 months ago

      I literally ran into this myself recently replacing the SSD inside an old Chromebox.

      I was literally unaware that it was an entirely different spec based on keying.

      Further, it seems I can’t find any reputable companies that make a SATA M.2 SSD in the 2242 size anymore. I can only find old Western Digitals that are more than double the cost of an equivalent NVMe simply because WD doesn’t actually make SATA M.2s in that size anymore.

      The only companies that make them in that size are all weird bogus never-heard-of-them-and-the-reviews-are-terrible.

      • skuzz@discuss.tchncs.de
        link
        fedilink
        English
        arrow-up
        21
        ·
        2 months ago

        No diss. I read that slot comment above you and went, “yep, yep, yep, makes sense. Man our standards are often dumb.”

        Laughed with joy at your comment, because I totally get how foreign this shit is to so many people. It’s like if I walked up to a building engineer asking how they know that iron beam is safe for another 50 years via their skills and I’d just be like “…do what now?”

      • Kecessa@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        14
        arrow-down
        1
        ·
        2 months ago

        SATA is the interface that was mostly used until a few years ago, most people are used to seeing the version using cables (with an L shaped connector at both ends, still seen on 2.5" and 3.5" hard drives) but at some point they started making SATA drives using the m.2 form factor (with a connection similar to the one pictured in the OP) but the m.2 form factor is also used by other interfaces and not all of them are physically the same (the “expansion card” looks similar, the connection can be different), m.2 NVME drives are the ones mostly seen for storage space these days so most people assume that if storage is the m.2 type of will be NVME but sometimes (especially for laptops) it will be SATA that’s required instead (like in OP’s case)

        Picture of an m.2 storage drive can be seen here and there’s a keying section that shows the difference between B and M keys: https://en.m.wikipedia.org/wiki/M.2

          • bizarroland@fedia.io
            link
            fedilink
            arrow-up
            11
            ·
            2 months ago

            Don’t forget to put the drive in slave mode if it’s not at the terminal point of the cable.

            • corsicanguppy@lemmy.ca
              link
              fedilink
              English
              arrow-up
              1
              ·
              2 months ago

              Umm-mmm, you said what’s now a bad word because - Robert Plant is a liar - words never have two meanings.

      • callouscomic@lemm.ee
        link
        fedilink
        English
        arrow-up
        4
        ·
        2 months ago

        They said the b SATA m2 SSD key NVMe AFR actuator clusters the cache in m.2 U.2 mSATA PCIe made a SATA lata gata when she said 2.5" wasn’t big enough but 3.5" was too much and LBA LP MTTR spindles the motor with 28 pins when it lost a pin while bowling for transfer rate cause you failed to defragment your USB-connected PCIe Gen 4 pokemon with AHCI finding IOPs over 9000 so the HDD Teraflopped into the EDSFF pool and RAMmed itself 6 feet under.

        /s?

      • ooterness@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        2 months ago

        SATA= Slow (Max 6 Gbps) PCIe = Fast (Max > 100 Gbps in theory)

        This is the maximum rate from the drive to the motherboard. Many drives are fast enough that SATA works become the bottleneck. With PCIe, the drive can run at its full speed, whatever that may be.

    • Cornelius_Wangenheim@lemmy.world
      link
      fedilink
      English
      arrow-up
      12
      ·
      edit-2
      2 months ago

      Another thing to watch out for is single-sided vs double-sided. Many laptops have flush mounted m.2 slots that won’t fit an SSD with chips on both sides of the board.