Until he actually had to use it.

Took 2 hours of reading through examples just to deploy the site.
Turns out, it is hard to do even just the bash stuff when you can’t see the container.

  • akash_rawal@lemmy.world
    55·
    2 days ago

    Time for the yearly barrage of “Setup CI”…“Fix CI” commits.

    That is my experience with basically every CI service out there.

    • frezik@midwest.social
      32·
      1 day ago

      Normally, you don’t want to commit code unless it’s been at least minimally tested, and preferably more than that.

      All the CI’s, however, force a workflow where you can only test it by committing the code and seeing if it works. I’m not sure how to fix that, but I see the problem.

      • Ajen@sh.itjust.works
        6·
        1 day ago

        Line the other commenter said, there’s nothing wrong with committing temp/untested code to a feature branch as long as you clean it up before the PR.

        • frezik@midwest.social
          4·
          24 hours ago

          There are issues that come up in niche cases. If you’re using git bisect to track down a bug, a non-working commit can throw that off.

          • Ajen@sh.itjust.works
            7·
            24 hours ago

            You might have misunderstood what I meant by “clean up before the PR.” None of the temp commits should end up in the main branch, where people would be bisecting.

      • smegEnglish
        23·
        1 day ago

        If you can test it on a feature branch then at least you can squash or tidy the commits after you’ve got them working. If you can only test by committing to main though, curse whoever designed that.

        • ulterno@programming.devOPEnglish
          2·
          1 day ago

          Well, it does have triggers for other branches:

          on:
  push:
    branches: [ "main" ]
  pull_request:
    branches: [ "main" ]

          So, most probably would have a way to run it on other branches.

          • odelik@lemmy.today
            6·
            1 day ago

            You can also use the workflow_dispatch execution pattern and use some data input params and execute through the portal interface.

            However, do be careful about trusting input params without sanitizing them (GH has docs around this).

            • ulterno@programming.devOPEnglish
              1·
              16 hours ago

              Thanks, I’ll look into that.
              While trying this time (as you can see in one of the commits), I added workflow_dispatch at the wrong place, causing a problem. Later realised that it is part of the on

      • houseofleft@slrpnk.netEnglish
        16·
        1 day ago

        Here’s my hot tip! (ok maybe luke warm)

        Write as much of your CICD in a scripting language like bash/python/whatever. You’ll be able to test it locally and then the testing phase of your CICD will just be setting up the environment so it has the right git branches coined, permissions, etc.

        You won’t need to do 30 commits now, only like 7! And you’ll cry for only like 20 minutes instead of a whole afternoon!

        • marzhall@lemmy.world
          3·
          24 hours ago

          Aggressively seconding this. If you can just do a step in a bash command, do that, don’t use the stupid yaml wrapper they provide that actually just turns around and runs the same bash command but with extra abstraction to learn, break, fix, and maintain for stupid, meaningless upgrades. It will save you time because you’ll be using better-tested, more widely-used tools and approaches.

        • frezik@midwest.social
          6·
          1 day ago

          Yeah, I think that’s the best that can be done right now.

          It also leads to a different question: do we really need these fancy systems, or do we need a bunch of bash scripts with a cronjob or monitors to trigger the build?

          • ulterno@programming.devOPEnglish
            2·
            1 day ago

            In my last workplace, I was responsible for making whatever automation I wanted (others just did everything manually) and I just appended a bunch of bash scripts to the Qt Creator Build and Run commands. It easily worked pretty well.
            I guess the fancy systems are again, just to add another layer of abstraction, when everything is running on their containers instead of ours.

        • CodeMonkey@programming.dev
          3·
          1 day ago

          We have all of our build and CI in make so, theoretically, all the CI system needs to do is run a single command. Then I try to run the command on a CI server, it is missing an OS package (and their package manager version is a major version behind so I need to download a pre-built binary from the project site). Then the tests get kill for using too much memory. Then, after I reduce resource limits, the tests time out…

          I am grateful that we use CircleCI as our SaaS CICD and they let me SSH on to a test container so I can see what is going on.

      • akash_rawal@lemmy.world
        5·
        1 day ago

        We test our code locally, but we cannot test the workflow. By definition, testing the workflow has to be done on a CI-like system.

        There is nektos/act for running github actions locally, it works for simple cases. There still are many differences between act and github actions.

        It might be possible for a CI to define workflow steps using Containerfile/Dockerfile. Such workflows would be reproducible locally.